preloader

harmonyrental.gr

Check-In Instructions for Harmony Twin Lofts Metaxourgeio 2

Welcome to Harmony Twin Lofts Metaxourgeio 2!

We are excited to host you. Below, you will find all the necessary details for a seamless and stress-free check-in experience.

Entrance & Access Instructions

  • Building Entrance: The photo above shows the main entrance of the building.
  • Access System: On the left side of the entrance, you’ll find a keypad system (see the second photo).
  • How to Enter:
    1️⃣ After completing the check-in form, you will receive the access code.
    2️⃣ Enter the code on the keypad.
    3️⃣ The door will unlock, and you can proceed inside.

Locker Instructions

  • Locker Location: The correct locker is the bottom one, marked with the number 2 (see photo above).
  • Locker Code: Please contact us via WhatsApp 1 hour before your check-in time to receive the correct code.

Getting to the Apartment

  • Once you retrieve the key from the locker, take the stairs or elevator to the 1st floor.
  • The apartment is located on the left side and is marked with the number 2.
  • This is the left apartment out of the two available on the 1st floor.

Power Activation Instructions

  • Once you enter the apartment, locate the card slot on the left side of the door (see photo above).
  • Insert the magnetic key card (which is attached to your keys) into the slot.
  • This will activate the electricity and power up the apartment.

Important: The power will remain on as long as the card is in the slot. If you remove it, the electricity will turn off.

Wi-Fi Information

  • Wi-Fi Name: VODAFONE_GigaWiFiHome_6565
  • Wi-Fi Password: 7mQ5ATeba5mL7mt2

📶 You can also scan the QR code above to connect directly to the Wi-Fi.

Emergency Instructions

  • This is the electrical panel (see photo above).
  • In case of emergency, please contact us for assistance.
  • The apartment has a solar water heater, so there is always hot water available – you don’t need to do anything.
  • If necessary, you can turn off the main power switch by lowering the main breaker in the panel.

Please do not adjust any other switches unless instructed.

User Login

Lost your password?